Dan is very knowledgeable and helpful. I’ve had 3 sets of heads milled here and always receive excellent results. Thanks for the help guys

Refused to even talk about rebuilding my engine for me, sucks they came highly recommended, still trying to decide on another shop. But thats the way it is sometimes so oh well.

Best machine shop around. Turn around time is usually a couple days.

Great place ready to help Randy is very thorough does wonderful work

So far, so good. Just based on a phone call I had a conversation with a knowledgable nice staff member. Looking to have a motor built so will review further upon that.

Ask for Randy! So far they have done more than they necessary trying to help me out and I appreciate it!

Very clean honest staff

I had my Honda b18b1 bored and assembled by them and after I got the engine in it had a piston ring issue with the rings they got and sized. So I tried to contact them about warranty work and every time I called I got told they’d have the owner contact me but never heard anything back.

They built a 351w for me. And I have to say there attention to detail putting it together was amazing. After they were done I used a bore scope to look down the intake ports. And when I looked at where the intake and head meets it was perfectly done. No gasket material in the port. It was a very clean transition. Thats just one spot I looked at. This motor is now making close to 600hp at the tire with a turbo on it. And Im not worried one bit.

Had a long bolt snap off deep in an old motorcycle cylinder. I initially called two different shops and received roughly the same answer, bring it in and well take a look, but something about the person I talked to at Jonhsons, I believe her name was Stacey, instilled me with confidence. My initial gut feeling paid off because the fine folks at Johnsons had the problem fixed and ready to go one day later for an incredibly fair price! Thanks! Im a loyal customer and will definitely be using them for any future machining needs.

Great staff and the owner Randy is awesome. Thank you for your help and getting the heads for my car done so quickly.

Stopped in to get help with piston rod pressing was explained that the style pistons I had pressing was not required. Up front honest was greatly appreciated

Great place, very knowledgeable staff. Excellent work

Recently had a 351w rebuilt here, service and communication was great. Very friendly and listened to what I wanted.

Good service at a fair price.

Took my Duramax heads to be resurfaced and they were done in 4 hours. Great work at a reasonable price. Cost $150 to have 2 heads cleaned, checked and resurfaced. Will definitely use them for any of my needs in the future.

Ive been coming here for years never once did I have a bad experience. .very nice customer service. .very fast turn over ..when you need your parts done they never have a problem with getting it done. ..I will always come back... to go somewhere else would be a mistake. ..

I needed the head on my 97 Toyota machined. i brought it in and within an hour they had it ready to go. They had very competitive prices and are very nice people. It was a pleasure doing business with them. Highly recommended

Randy has been doing all the machine work for all the fun toys I have had and built over the years. Superb work and even better customer service, I am a lifetime customer. Randys work has been solid for me for 12+ years. I always send my friends to him without hesitation.

They did a great job machining my flywheel for my big turbo audi a4. Gave them specific instructions and they did exactly that! I highly recommend them.

I dropped off my 4g63t bareblock here & I elected to pay for the shortblock assembly. Randy definitely went out of his way for me & since this was my first time rebuilding a motor, he took the time to answer all my my questions about what was needed. Ive always heard of Johnsons reputation & Ill continue to refer my friends here because of how plesent the experience was for me. I got my motor running 3 1/2 weeks after throwing a rod. Thanks Randy! Will be coming back for this head sometime in the future.

Best people and prices around, good quality work and you couldnt ask for any nicer people

Building badass race car engines. Oh yeah they build regular ones too. Probably

Normally I would drive to Tacoma for all my Machine Shop needs but after finding this place, never again! Good prices, excellent turn around time!

Very knowledgeable . Fantastic workmanship . I really love dealing with Randy . I would recommend these guys to anyone :)!

Brought my f250 there to have motor rebuilt it was tapping loud so he adjusted it it went back like 3 more times still taps and now tje head gaskets are leaking after less than a year and it still taps im to tired to go back again i paid what i was asked and got a junker im out do t go here if you want it done right

Charged me 100 dollars to clean two engine blocks and when I got them back they still had dirt sand and gasket material all over them....

I was staying at American Heritage Campground, a few blocks from the shop, and ran into a rather ridiculous problem... I had an improperly installed bike hitch on my 2 receptor with a stripped, trapped steel bolt that was stuck inside the shaft of the bike carrier. I basically needed the bolt bored out or cut off, so I could get my hitch back and tow my camper again!I looked up machine shops and found this place around the corner. The gal on the phone was super-nice and had me speak to Randy, who said to come on in. The next day I dropped by so they could take a look. I overheard the office gal speaking to a customer on the phone, and Randy talking with a guy in their office, and they both sounded extremely knowledgeable and friendly. After a 10-minute wait, Randy checked out my problem and had me pull my truck in back.He busted out the handy-dandy Sawzall and cut that sumbitch off super-quick. He then took the cut piece into the shop to trim the bolt a second time so I could use the bike rack again. I was outta there in 30 minutes total.Wanna know the cost? NOTHING! Randy didnt charge me a dime (despite the pricing board inside stating a minimum $25 for shop time, which Id already offered to pay). Awesome guy.I was shocked to see the other review here about rude treatment and overcharging. Hey, man, everyone has their bad days. You said youd had a grip of positive experiences but then, one bad one and you run to Yelp to post a negative review? Not fair.Randy is a gentleman and a scholar and did me a solid, ABSOLUTELY FREE. I would totally trust this business for any future dealings.

Very quick and friendly service. They even took the time to do the job right without extra charge.

The guys do great work fair pricing

Great people very honest and up front!! Been been using them for years!!

Awesome staff with a lot of experience and know how.

Great group of guys and very knowledgeable.

Excellent and fair

Super cool, super friendly, and prices are very reasonable

The best machine shop in the area

Friendly people, fair price

Quick professional service.

Poor customer service, no communication, requested firm quote before work to be started & was not contacted until work was complete. I will never use this shop again.

Best machine shop in Washington

Great work

Good

Awesome