I have had great results from most of the work Western Engine Supply and purchased parts from them on occasion. Ive also recommended friends to them with good reviews back.

Amazing staff, excellent service. I will definitely return for any future work on my vehicles engine work.

Terry and staff were always pleasant to work with and were upfront with timelines. There was an issue when I finally got my motor back with the exhaust cam being out of time. This would have been a big nuisance had I not caught it with the engine still on the stand. But Terry had his guys come to my house and had it corrected that day. Ive put almost 2k miles on the motor so far and it is running like brand new. I also feel like I got an exceptional value compared to what other shops are charging for the same type of work.

HIGHLY RECOMMENDED.Terry and the whole crew are amazing! They were able to work with me and get my 2003 terminator cobra completely rebuilt! Shes running better than ever. It had taken sometime but thats were you know its done right. Thanks to Terry and the crew!!!

Terry and the Crew did a full remove, rebuild, re-install on my 1953 Chevy. They took amazing care of my baby, no nicks or dings taking the motor in/out. Had some problems after the rebuild, which can be expected with such comprehensive work, and he totally stood behind his work and made it right. I would not hesitate to recommend and would go back to Western Engine even with my precious collectable cars.

We have been using Western for years, every product I have gotten from them has been flawless. No issues what so ever. Which is big praise from someone who knows the amount of things that could go wrong when machining automotive parts. Good Job guys and gals!

I purchased a Ford 302 5years ago. Very good engine. Im considering a 351 for the same vehicle. They are my first choice for engines. My 302 still runs strong. Need more torque than the 302 can supply.

Having a 347 stroker built buy them awesome shop

So you do engine work but wont deck a BMW M54B25 engine... a simple take 0.015 off. Not very mechanically inclined if you cannot do that simple job.Western Engine......Nice reply. Ex CNC lathe/mill, decking is decking. 3.6 stars

Been using Western for over 10 years. The shop does great work. Terry is honest, super knowledgeable, takes time to talk about your specific goals and has actually saved me money talking me out of services I don’t really need. This is why I keep going back.

I had an excellent experience. I didnt have a press and needed some new pistons swapped over for my engine rebuild. Quick and timely. Competitively priced. There could have been a little better communication/service, but dont let this deter you from using their services.

Great knowledgeable representative. I can tell she was experienced. Because we spoke the same jargon language. And was able to answer all my questions, very helpful, polite. I will be definately getting all my machine work done here.Cant rate them on their quality machine work yet.Sorry, havent taken any engine parts in yet.

Horrible! Especially Terry! Hey Terry look! Heres my threat of NEVER recommending your company! Terry, go ahead and respond like you have all the other bad reviews! Excited to see your response on giving me a car oil pump when the motor I brought into you was for a 4x4 truck that calls for a completely different oil pump because of the pick-up tube! Argue it, please!! Like you did when I called you! Youre also a thief! I want my money back for the incorrect pump kit! Your turn Terry....

I have them do machine work on my 3.8 Jeep. They did an awesome job, very nice and helpful

They did a great job with the machine work and ordering exactly what I needed to build my first engine.Everything was perfectly in spec, I tripple check everything!After the build and install it fired right up and runs/sounds great.Thanks for everything.

Always efficient, always great customer service.

If you want customer service, you will not find a stand up shop like this anywhere! They admitted a simple mistake, refunded our money, even delivered the product back to us in exactly 18hrs. They put us on priority and delivered more than expected. Keep in mind we dropped off the product right before they closed. WOW! Keep it up, this is the standard every shop should follow, thank you very much and you have earned our business for life!

These guys do amazing work and super fast turn-around times!

An honest shop, that delivers what it promises. I could not be happier with my experience with these folks. From Mona at the front desk to Terry the gentleman that runs the show. An honest quote beating the others by just a bit as well as professionalism, knowledge and service. I had my 2005 Dodge Ram 1500 (with a 4.7 V8) over heat due to a malfunctioning thermostat. Estimates from shops where way out of my budget for what i thought would just be new heads. I decided to undertake my own engine repair by purchasing new heads, water pump, and thermostat. Once all was installed (purchased from Advance Auto Parts). I was rewarded by the engine firing right up, only to discover that my short block was now knocking due to the severe overheating that had occurred. As it had been 25 years since the last time I was this deep in an engine. I was shocked at the prices being quoted and dismayed by the caviler attitude I encountered with shop after shop. I called Western, explained my situation to Terry and the price dropped too; what for was me affordable. 1 week later, they got me my engine (short block) and delivered it at slightly less then the original quote! I have several gear head friends and made sure they knew how me, the not so experienced shopper was treated. I would recommend to anyone.

I have been working with Western Engine Supply for almost 2 years now. They have always had fair pricing and their machine work is second to none. I would recommend their services to anybody who is looking for good machine work or engine work.

Terry is a man among men. The work they did for me is beyond reproach. I look forward to working with them again. I highly recommend Western Engine Supply for all your engine servicing needs.

Friendly service great work so far will keep using their services

First off I would like to say how professional and smart the owner Terry is. I was shopping around for a machine shop here in Colorado for awhile, and after meeting Terry and doing a walk through of his shop. I decided to have him build a 460 for me. After one short week the motor was finished. Stabbed it in, in a couple days and it took off beautifully. Its good to find a shop that takes pride in what they do and stand behind there work. If your on the fence about a engine builder just go in and talk to them you will be sold, like I was. Thanks guys for the great work!!

I have three Chevy diesel trucks and lots of other cars and a boat. They are not always the fastest or the cheapest, but they are REALLY REALLY GOOD! I have taken my vehicles to other places hoping for fast turn-arounds, but I now only use Western Engine because they fix it the first time RIGHT.

We toured the shop and decided to have Western rebuild an obsolete 391 Ford industrial engine. The only problem we had was a communication problem caused by our IT department. Terry called and left a call me urgent voice mail that I never received. I chewed him out when we picked up the engine because of the 1 day delay that I hadnt been told about. Three weeks later when the IT department restored something I received his voicemail with a date stamp of the day he called. After re-installation, break-in and a full load test, every operator has told me that I did a great job! This engine had never run that well before.Would I take another engine to Western Engine? Yes I have submitted budget requests for 4 more. Probably 1 a year.

Originally was told engine rebuild would cost $5000, then it kept going up. By the time I actually got my van 2 1/2 after they said it would be done the total bill was over $6300. 5 months and 12k miles later the engine blew. AWFUL experience. STAY AWAY!

I asked for my block to be baked and inspect the line hone and bore taper. I called a week or so later and was told all my machine work was done. Boring, Decking the block and bake/shotpeen. I paid for the work and thought hard about was came out of my mouth when I dropped off my block. I accepted that I may not have been clear about boring but I never mentioned decking the block. To be fair to the shop they did refund the money for that service. This is the first engine I have built and in my profession (engineering), I consider it part of my job to educate my clients. I would choose another shop in my humble opinion. Search auto machine shop or engine rebuilding services.

Horrible service. Time after time, their estimated time projections were off. First it was, Itll be just a few days. Then it was, Actually next week. Then it was Tuesday. Then Wednesday. Then, finally, Thursday and even then, that was BARELY correct.I understand its hard to estimate when you can get a car done but when you say it will be ready at [x time] today and you end up waiting for over an hour is ridiculous.On top of this the staff, especially the receptionist, is unbelievable rude.

My shop has taken several diesel intake manifolds for cleaning, and both have come out very clean, and made the cars run beautifully. Will definitely be going back for this service in the future!

Good, fair,and prompt service

Had them rebuild subaru ej257 heads in March. Installed with brand new short block from Subaru car would never start. I been trying to find out whats wrong with it. I took it to a subaru performance shop. They car has 30 psi of compression due to heads not being built / assembled right. I been out of a car for almost a year. Now am out even more money because they could built my heads right. Very frustrated. I would like my money back plus money for damages and down time.

Never got a call back

Amazing I dropped a head off this morning and it was done by 5 ..bitter people leaves bad reviews.. I run 5280 burger bar in Denver and Westminster employees give me a call.

Good customer service. Friendly staff and helpful advice.

Got a great deal on vaccum test and decking a head

I had a honda civic cylinder head rebuilt here a couple months ago and about 20 miles into the first drive, I hear all kinds of valve train noise and have to shut it off on the side of the road. Turns out the sealing bolt that goes in the inspection hole on my cam bearing cap wasnt tightened at all and blew out inside the valve cover while the engine was running... Unfortunately, I dont feel like I can trust this shop after that. Looks like I should have read the reviews first.

The company I work for spends on average $2,500 a month with Western Engine. From small jobs like just resizing a connecting rod to complete engine block jobs. I have my self built at least 20 short and long blocks where the machine work was done by Western and I have NEVER had a problem. When you assemble engines there are steps that the mechanic must take responsibility for. Example when your crankshaft has mileage wear and you send the crank to be ground BUT you decide not to send the connecting rods because you feel there fine. That is a bad decision. The list of responsibility when taking on the title of mechanic is end less. Engine building is not something you wake up one morning and just decide to start doing. Learn the responsibility and except the consequences when skipping procedure before you point your finger in the opposite direction.

Great people great work

This place is extremely knowledgeable and have great customer service.

AWESOME CREW!!!! I took my 2004 VW Passat TDI there with possible transmission issue after being told by another company that it was throwing a transmission codes and the torque converter was going out ($5000) estimate. I never saw anything light up on the dash though. They test drove it checked the codes and told me it was fine. I was also getting an check engine light and one glow plug was out. The replaced all 4 at my request (when one goes I believe the others will soon follow). Great price and a truly honest shop. Darryl is a super duper service adviser. They always fix it right the first time.

Nice folks, great work but a bit over proceed comparatively

Was sold what was supposed to be an impressive chevy stroker V8. After weeks and weeks of run around and installation in my truck it still didnt run right. Multiple trips back and multiple times being told it was fixed and it still didnt work right plus the lifters were making a bad ticking noise. Finally got my money back... well most of it.

Quality work good working best prices town

I will never again use this company, first of all Terry who I dealt with was arrogant and rude the whole time we had to deal with him. That bit of unprofessionalism and that fact that they do not stand by there work is probably the reason reviews are poor. We paid them 2400.00 to rebuild an engine, from the get go it had valve noise. Terry told us his guys didnt make mistakes, had our guys fix it cause we didnt want to deal with the attitude.5 months later vehicle smoked like crazy, so we took it back to them. They told us they couldnt get the car to smoke. I soon as I picked it up it smoked. Bottom line this place does a terrible job at something their suppose to be good at. Best to go somewhere were their going to stand by product and word.

This is the worst place you could get engine work done from stay away the one positive review is someone that works there. Trashy rednecks that only kinda of know chevy engines. And beware of the gay guy with glasses up front if i knew his name I would of just put that he is super rude and unprofessional. Just trust me from a first hand experience stay away.

Terry is awesome, the staff is really friendly, very technical and savvy in engines.

Took a 2.0 Zetec in for some work. Crank turned, block bored, and new pistons installed. Wanted head work done, but was told that the head was cracked. The engine ran fine before teardown, no compression loss or coolant loss. Picked up the block and grabbed a different head from a junkyard, which worked great. Put it all together and within a week, number 1 rod was knocking. Bearings were wiped out, had tons of machining trash in them. Crank is now unserviceable. Rather than dealing with them, I just cut my losses and dropped in a used longblock.

Dealt with western engine for over 4 years and maybe 20 different complete jobs. they do good work and never had problems

Needed my engine bored out, they told me over the phone they would have it done in a week when I dropped it off they changed it from a week to a week in and half. I called them once they had my engine for a week and a half and they told me they hadnt even started work on the engine and they needed another week. Rosa who we spoke to on the phone was very rude and not at all thrilled to address the issue. We picked up our engine that day and took our business elsewhere.

This place is junk they took $2500.00 to rebuild an engine for our shop. Two months later there was valve noise, we called Terry who is an idiot and he stated that it has to be a fuel injector noise cause his guys are perfact and dont make mistakes. We made valve adjustments and the noise went away. Six months later the engine smokes on start up we where told that we nevered replaced the PCV and we did with an install kit. but we let them change it and it stills smokes. We where told that it was normal condensation build up in the exhaust system and it was ok. We were told that when we pulled away that we reved it up to high and the smoke was black and it was fuel related. When we got it back to our shop we lifted the vehicle and noticed that the head gaskets and the oil pump where leaking. I called Terry again and he stated that he found nothing wrong with the vehicle and it must be something we are doing wrong. All I can say is stay away from this place they are rip offs and will not honor any of there warrantys-I wish I would have read all the reviews about this place before we used them because if there was a no star option i would bet that they would have a no star review about them and I am willing to bet all the good reviews are from there empolyees to try to make this a trust worthy place and they are not.

We brought in two diesel heads for magnaflux, pressure test, and milling (if necessary), and was told they would have the results of the magnaflux test in the morning. No joy, nothing until I asked to speak with the owner. THEN suddenly theyve been magnafluxd and there is no crack. Fine, on to pressure test. Another day, more dont call us, well call you when its done, and nothing. Finally phoned, get told theyre waiting for authorization to DO the pressure test (NOT true, that was given already) and that they left several messages throughout the day (but not even ONE time did their number show up on Caller ID, let alone a message. Finally went to pick them up and take them to a real shop. When I get there, theyve lost one of the valve stem seals, so we had to buy a new set. Not even remotely apologetic about any of it, couldnt take a check as it wouldnt go through their processor (though there was nothing wrong with it. I paid by CC, took the heads, and will NEVER give them the opportunity to hold up a job, lose a part, and overcharge us ($40 to clean it, $40 to magnaflux...) like that again. So be warned; NOT a good company to do business with.

Stay away . Find a better machine shop. Crankshaft are over ground and wrong thrust angle.Save your money and your time stay away.

Friendly, good work. Payed less than expected.

Horrible customer service to start off with....Terry needs an attitude adjustment and should really watch how he speaks to his customers.i will no longer bring my business here and will NEVER RECOMMEND ANYONE else to go here.......There are other shops in Denver you are not the only machine shop!!!

Had a horrible service charge me too time for their bad work this place never refunded anything if you want good work on your moter go to a different place this place did my moter two times it still smoke had another place rebuild it have had no problem after that go to all American four wheel drive

Good experience

Very honest trusted people

Saved me 200 dollars on a cam.

Place to be

I think the status rude I called to speak mechanic to see if it was safe for me to drive my truck to them in a rude way she said no you cant speak to ac mechanic so um I would advice anybody to bring your vehicle to them .rude office people rude .

Good work